Description
This is the bench you need for the space you have. The PRx Profile® Incline Folding Bench can adjust to 12 total positions, covering everything from flat to the military press position. Engineered to fit perfectly within all of our wall-mounted racks,* the Incline Folding Bench will line up with your rack, so you can get straight to your lift without fuss, no matter the incline position.
Lift confidently with a bench that is sleek for recreational users, yet robust enough for the most dedicated lifters with a 1000lb capacity. All you need to do is pull out from the wall, and the bench deploys to the flat position. Adjust it to your preferred incline level and you’re ready to go.
All done? Simply fold back onto the wall in one motion for a low-profile bench that sticks out only inches when stored.
Made in USA. Patented and Patent Pending.
Specs
| Color & Finish |
Black powder coat |
| Frame Material |
11 gauge steel
|
| Pad Material |
Vinyl-covered foam, 2" thick
|
| Height |
18" from floor |
| Weight |
85lb (assisted with 120lb gas shocks) |
| Position Angles |
0°, 20°, 30°, 37.5°, 45°, 50°, 55°, 60°, 65°, 70°, 75°, 85° |
| Capacity |
1000lb
|
Deployed
Dimensions |
18" x 18" x 65.25" (HxWxD)
|
Stowed
Dimensions |
63.18" x 18" x 8" (HxWxD) |
Required Space
|
65" x 50" x 66" (HxWxD) |
*While the Fold-In ONE Rack is fully compatible with the Incline Folding Bench, the uprights may not fold in completely flat due to the profile of the bench when stored on the wall.
All mounting hardware is included. Ships fully assembled.
Suggested Space
The required space for your Incline Folding Bench for proper use within your rack is 65" height on the wall, 66" from the wall, and 50" of total width. This allows space for the bench to be properly stored, deployed, and used.
The Incline Folding Bench mounts onto two 16" studs, centered between any of our wall-mounted racks. If your studs are not spaced 16" apart, or you have unevenly spaced studs, you will need a ledger board.
If you have an obstruction that is 8-15" from the floor (such as an outlet, foundation lip, or a wall bracket for your rack), please email us at sales@prxperformance.com for details.
